Tel:+86 29-82543518

Navigation

Contact Us

Location:Home > Technical > FAQ

Stator winding is overheated

Clicks:Updated:2012-02-16 09:02:57

Possible causes:   1、Extreme overloaded, rotor/stator rubbing, or incorrect motor output selection; 2、Three-phase voltage is unbalanced, or lower than the rated voltage; 3、Winding is wrongly connected; 4、Cooling

Possible causes:  
1、Extreme overloaded, rotor/stator rubbing, or incorrect motor output selection;
2、Three-phase voltage is unbalanced, or lower than the rated voltage;
3、Winding is wrongly connected;
4、Cooling circuit is blocked, or too much dust is accumulated;
5、Winding is short circuited or earthed.

陕ICP备11002210号 | | 技术支持:尘埃网络